Desktop Return Instructions
Packaging your full size desktop
1 Remove Foam Protectors
Please remove the 4 corner foam protectors from the box. Please set them aside as they will be reused later. Do not remove the inner box, and open the flaps.
2 Wrap and Insert Tower
Wrap your tower with the included bubble wrap and place it inside the inner box. It should fit snugly. If it's too tight remove one section of bubble wrap at a time and reinsert into the inner box.
3 Tape the Inner Box
Tape the inner box closed with one of the included pieces of tape.
4 Reinsert Foam Corner Blocks
Reinsert the foam corner blocks. It'll be a tight fit.
5 Tape Outer Flaps
Use one of the included tape strips to hold the two outer flaps together.
6 Seal the Box
Use the other six tape strips to securely close the box the rest of the way by using two overlapping strips of tape on each flap and two overlapping strips of tape down the center to finish sealing the box.
7 Repeat on Other Flap
Repeat on the other flap and down the middle.
8 Attach Return Label
Attach the return label over the top of the inbound label. Please reach out with any questions or if you're ready for us to schedule a courier pickup.
